CSX: Specifications

Mains Supply
Mains voltage (L1, L2, L3)
CSX-xxx-V4		3 x 200 VAC ~ 440 VAC (+ 10% / - 15%)
CSX-xxx-V6		3 x 200 VAC ~ 575 VAC (+ 10% / - 15%)
Mains frequency (at start)		45 Hz to 66 Hz
Rated insulation voltage		600 VAC
Form designation		Bypassed semiconductor motor starter form 1
Control Voltage (A1, A2, A3)
CSX-xxx-xx-C1		110-240 VAC (+ 10% / - 15%)
		or 380-440 VAC (+ 10% / - 15%)
CSX-xxx-xx-C2		24 VAC/VDC (± 20%)
Current consumption (during run)		< 100 mA
Current consumption (at power-up)
CSX-xxx-xx-C1		10 A
CSX-xxx-xx-C2		2 A
Inputs
Start (terminal 01)		Normally Open
		150 kΩ @ 300 VAC and 5.6 kΩ @ 24 VAC/VDC
Stop (terminal 02)		Normally Closed
		150 kΩ @ 300 VAC and 5.6 kΩ @ 24 VAC/VDC
Outputs
Main contactor (terminals 13, 14)		Normally Open
		6 A, 30 VDC / 6 A, 250 VAC resistive
Programmable relay (terminals 23, 24)		Normally Open
		6 A, 30 VDC / 6 A, 250 VAC resistive
Environmental
Degree of protection CSX-007 to CSX-055		IP20
Degree of protection CSX-075 to CSX-110		IP00
Operating temperatures		- 10 °C to + 60 °C
Humidity		5% to 95% Relative Humidity
Pollution degree		Pollution Degree 3
Vibration		IEC 60068 Test Fc Sinusoidal
		4 Hz to 13.2 Hz: ± 1 mm displacement
		13.2 Hz to 200 Hz: ± 0.7 g
EMC Emission
Equipment class (EMC)		Class B
Conducted radio frequency emission		0.15 MHz to 0.5 MHz: < 56-46 dB (µV)
		0.5 MHz to 5 MHz: < 46 dB (µV)
		5 MHz to 30 MHz: 50 dB (µV)
Radiated radio frequency emission		30 MHz to 230 MHz: < 30 dB (µV/m)
		230 MHz to 1000 MHz: < 37 dB (µV/m)

This product has been designed as Class A equipment. Use of this product in domestic environments may cause radio interference, in which case the user may be required to employ additional mitigation methods.
EMC Immunity
Electrostatic discharge		4 kV contact discharge, 8 kV air discharge
Radio frequency electromagnetic field		0.15 MHz to 1000 MHz: 140 dB (µV)
Rated impulse withstand voltage (Fast transients 5/50 ns)		2 kV line to earth, 1 kV line to line
Voltage dip and short time interruption		100 ms (at 40% nominal voltage)
Harmonics and distortion		IEC61000-2-4 (Class 3), EN/IEC61800-3
Short Circuit
Rated short-circuit current CSX-007 to CSX-037		5 kA
Rated short-circuit current CSX-045 to CSX-110		10 kA
Heat Dissipation
During Start		3 watts / ampere
During Run		10 watts typical
Approvals
RCM		IEC 60947-4-2
CE		EN 60947-4-2
CCC		GB 14048.6
EAC		TP TC 004/2011, TP TC 020/2011
Marine		Lloyds Marine No 1 Specification
UL / C-UL		UL 508

CSX Specifications

Mains Supply

Inputs

Outputs

Environmental

EMC Emission

EMC Immunity

Short Circuit

Heat Dissipation

Approvals